Metals and other materials can be cut smoothly with laser pipe cutters. Program the machine for a wide range of custom tube cutting jobs. The basis of laser tube cutting is the laser beam. Lasers are differentiated by wavelength and are often used in communications engineering due to their ability to carry large amounts of information without electromagnetic interference and signal loss. The advantages of its high energy density and narrow beam are realized when applied to metal cutting tubes.
A laser pipe cutting machine includes a gantry frame, a laser cutting head, a fixing device and a PLC controller, the gantry frame is provided with a first drive frame that can move along the gantry frame on the horizontal X-axis. The first drive frame is provided with a second drive frame that can move along the first drive frame on the vertical Z-axis. The second driving frame is respectively provided with a rotating frame that can rotate horizontally around the second driving frame in the horizontal plane. The laser cutting heads are respectively installed on the rotating frame and can rotate vertically around the rotating frame in the vertical plane. The fixing device is located at each gantry. The lower part of the frame is used to fix the pipeline, and the first driving frame, the second driving frame, the rotating frame and the cutting laser are all electrically connected with the PC controller.
Main features of automatic pipe cutting machine
1. Jianneng automatic pipe cutting machine adopts numerical control feeding and double mechanical positioning control gate control, and the cutting accuracy can reach 005mm; and the light cutting is smooth without burrs and without secondary processing.
2. Continuous automatic feeding, no dead ends, no tailings, one person can operate multiple machines; save a lot of labor costs for enterprises.
3. Independent double oil clips prevent the large pipe from rotating, saving a lot of consumables costs for enterprises. Independent clamping and undercut pressure adjustment can prevent workpiece deformation and pinching, saving a lot of material costs for enterprises.
4. Double rollers are used for undercut to ensure that the rectangular tube does not change the direction of undercut, to ensure that the cut is not deformed and burr-free.
5. The intelligent control system can distinguish the head and tail of the material and remove them, which is very beneficial for cutting short pipes. Automatically detect and count the length of raw materials (workpieces), reduce the work intensity of operators, and improve the enthusiasm of employees.
Operation steps of automatic pipe cutting machine
1. Put the whole bundle of pipes to be cut into the material rack.
2. Set the cutting parameters.
3. Press the switch button.
4. Observe the pipes to be cut on the material rack, and increase the pipes to be cut on the material rack in time.
5. The emergency stop button must be pressed directly during emergency stop, and the operation will continue after recovery.
The above are the advantages, characteristics and use steps of the laser pipe cutting machine. Do you still want to know more about sheet metal processing? Bolden will continue to give you more knowledge about sheet metal processing.
English 
Chinese