FinishstampingIn addition to technical measures, the production safety of operations must also adopt management countermeasures at the same time, both of which are indispensable. In the past, in order to avoid unsafe stamping behaviors, many safety safety devices and safety tools have been developed, and some practical results have been obtained, but the results in marketing promotion and application are minimal.
This is mainly because the management method is false, and there are equipment and special tools, but the operator is not easy to use it properly or refuses to use it, and the equipment is broken and no one repairs it, so it cannot be fully utilized. It's not hard to see,
The implementation of pressure safety measures must be ensured by management methods, otherwise technical measures will not be fully utilized.
The stamping operation has relatively large risk factors and the characteristics of the accident Douhui area, and the damage caused by the accident is generally relatively serious. Therefore, a large number of stamping workers are afraid in the core of production and manufacturing, and have a heavy psychological burden. There is a greater danger.
Stamping work
The key risks in stamping operations are as follows:
1. Risks of equipment construction: a very large part of stamping equipment uses rigid clutches. This is also the use of a cam mechanism to make the clutch tightly connect or loosen. Once the tight connection operates, a full ring must be carried out to terminate. If the hand cannot be immediately pulled out of the mold in the circulation system, it will inevitably occur. Hand accident.
2. Operation with faults: The use of equipment that operates with faults is very prone to accidents.
3. Uncontrollable posture: The equipment will also be subjected to habitual severe shock and vibration during operation, causing some parts to be deformed, damaged or even broken, resulting in uncontrollable equipment posture and dangerous consecutive shocks or accidents.
4. Power switch failure: The automatic control system of the power switch of the equipment is erroneously operated due to human factors or external reasons.
5. Reflective damage: The rotation of the equipment and the parts of the transmission system are likely to cause reflective damage accidents.
6. Risk of mold: The mold plays the primary role in the production and processing of product workpieces, and is the centralized release part of the kinetic energy of all system software. Because the mold design scheme is unscientific or defective, and the safety of the workers in use is not fully considered, in actual operation, the hand needs to be immediately or habitually inserted into the mold before the operation can be performed, which increases the risk of injury. possible. Defective molds may cause accidents due to damage, deformation or destruction and other factors that may occur unexpectedly under normal operating conditions.
English 
Chinese