laser cutterPower on alarm
1. Whether the water pipe is turned on
2. Check whether there is water in the water tank
3. Check whether the water pipe of the water tank is skimming or there is an object pressing the water pipe, so that the water pipe does not flow.
4. Check whether the connection between the water tank signal line and the machine is loose or the signal line itself has problems.
5. If it is a water tank alarm, check the water tank.
6. In the case of an alarm on the main board, first check whether the waterproof protection terminal on the main board has jumps. If so, please replace the main board. Common fault diagnosis methods of laser processing machines.
Does not return to the starting point?
1. Whether the X and Y pulse indicators of the main board are on
2. Replace the motherboard. Common fault diagnosis method of laser cutting machine
laser cutterCut not round？
1. Check whether the screws on the screw bases of X and Y are tightened.
2. Check whether the board is clamped
3. Check whether the graphics are wrong. Common fault diagnosis methods of laser cutting machines
laser cutterHalfway through work, the panel display shows "out of limit data error" and the machine stops working?
1. The machine and computer must be well grounded.
2. Replace the data cable or motherboard.
laser cutter2. Replace the data cable or motherboard.
1. Disconnect all power first, and wipe the high pressure head with cotton cloth.
2. Cut the broken water tube and reconnect it to the laser tube. Then bind with cable ties.
3. Connect the high voltage cable. (There are 7 silver wires in the high voltage cable, one cannot be missing)
4. Use a fan to dry the wet area of the high-pressure head, and turn it on again after half an hour.
Laser software for laser cutter appears anonymous in the list or no hardware detected? (normal all numbers)
1. Click to refresh the list to see if it can be detected.
2. Check whether the COM terminal of the computer connection data cable is loose
3.Check with another computer
Replace the motherboardlaser cutterThe effect of cutting speed on cutting quality
It is also very important for the laser cutting machine to properly select the cutting speed during cutting. The optimal cutting speed range can be selected according to the equipment instructions or determined by experiments. Due to factors such as different material thicknesses, different melting points, thermal conductivity and melt surface tension, The cutting speed also changes accordingly.
English 
Chinese