Blog

There are new developments in laser cutting all the time. Below are some typical applications of laser cutting today.

Aluminum plate used to be a difficult problem for our laser cutting, because aluminum plate is a high-resistance material, and the absorption rate of laser is very low. It is difficult to laser cut aluminum plate because its processing demand is relatively large, and we also need to consider the fast and safe laser cutting of aluminum plate. use. Let's make it our must. Copper, aluminum and other highly elastic materials can be cut and processed with laser equipment.

Six points to keep in mind when typeset on a laser cutter
Before using the laser cutting machine, we will use the typesetting software to draw a picture on the program, and then put the graphics on the board, so that the laser cutting machine can process products in batches, typesetting is an important process of the laser cutting machine, and if the layout If it is not correct, not only will the efficiency decrease, resulting in waste of processed materials, but also the cutting effect of the entire processed materials will appear as follows. Laser cutting machine is an important process.

Analysis and testing of the main factors affecting the quality of laser cutting: According to the analysis of the factors affecting the quality of laser cutting, thermoformed parts with a thickness between 1.0 and 3.0 mm were selected, and the selected cutting blocks, cutting holes or cutting blades were tested. Laser cutting experiments were carried out. The test method is as follows

There are many types of wear parts on the laser cutting machine. The following describes the protection of the lens by the laser cutting machine. As the name suggests, the protective lens is used to prevent the collector lens from being damaged by dust and slag splashes, it is a necessity not only for laser cutting machines, but also for other laser equipment such as laser marking, laser welding and laser engraving. Therefore, the market for protective lenses is very large.

During long-term operation, many parts of the laser cutting machine will wear out, especially some commonly used parts. If it is not replaced in time, it will not only affect the normal operation of the equipment, delay the work cycle, but also cause certain damage to the laser cutting machine. In order to ensure the normal operation of production, factories and companies generally provide some commonly used accessories in case of emergency, so that production will not be interrupted.

There are four main types of laser cutting.

The precision of the laser cutting machine often affects the quality of cutting, and the deviation of the precision of the laser cutting machine for the cut product is unqualified. In the process of using a laser cutting machine, it is necessary to consider how to improve the precision of the laser cutting machine.

Many people who bought a laser cutting machine do not know how to adjust the focal length. Now I will share the method of adjusting the focal length of the laser cutting machine, hoping to help everyone.

Cutting speed The laser head for laser cutting can move along the shape of the part per unit time. The higher the laser cutting speed and the shorter the cutting time, the higher the production efficiency of laser cutting. However, when other parameters are fixed, there is no linear relationship between laser cutting speed and cutting quality. A moderate cutting speed is a numerical range within which the energy of the laser beam stays on the surface of the part for too long, forming too many scorch marks. Completely melted, making it impossible to cut.